3-Point Calibration - Lowrance X515C DF Operation Instructions Manual

3. Select the EP-15 Fluid Level and press
4. Press ↓ to select
menu will appear. Instructions on Calibration will be listed at the top
of the menu.
5. Highlight
N
UM
6.
Select F L
LUID EVEL
7. Make sure the fuel tank is empty, highlight
The following message will appear: Empty Level Calibration Com-
pleted.
Press ENT.
Fill up your tank, highlight
8.
Select
9. F L
ULL EVEL
The following message will appear
10.
pleted. Press
ENT
display.
Calibrate is highlighted on the device configuration menu (left). Cali-
bration menu (right) with calibration instructions listed at the top.

3-Point Calibration

3-point calibration is designed for tanks that vary in shape from the top
to the bottom. You can begin calibration at any point in the 3-point
process, but we recommend starting calibration with an empty tank.
In a 3-point calibration, you will set three points, one each for empty,
half and full levels.
1. Press
MENU| MENU
2. Highlight
B
US
ration menu. A list of network devices will be at the top of the page. 3.
Select the EP-15 Fluid Level and press
www.Busse-Yachtshop.de
and press
C
ALIBRATE
, press and select
P ENT
TS
, press ENT, then select E
F
LUID
and press
ENT.
, then press
EXIT
, use ↓ ↑ to select
and press
S
ETUP
.
ENT
. The Device Calibration
ENT
Press
2.
L
MPTY EVEL
C
and press
L
EVEL
Highlight
C
ALIBRATE
Full level Calibration Com-
:
repeatedly to get back to the main
NMEA 2000
, which will open the Bus Configu-
ENT
.
ENT
107
email: info@busse-yachtshop.de
.
ENT
press
and ENT.
and press
ALIBRATE
ENT.
and press
and press
ENT
.
ENT
ENT.
.