THOMSON LDK 5301 User Manual page 11

Monitoring Functions
Tally switch
1
The tally switch is used to control the tally indicators
at the front of the viewfinder and at the rear of the
carrying handle.
When this switch is set to the ON position, the tally
indicators light when the camera is on-air.
When this switch is set to the OFF position, the tally
indicators do not light when the camera is on-air.
02.30.5
1
2
The red tally indicators at the front of the viewfinder
and at the rear of the carrying handle light to indicate
that the camera is on-air. They do not light when the
camera is on-air if the tally switch is set to the OFF
position.
LDK 5301 User's Guide 1.5 Inch Viewfinder
2
Tally indicators (red)
1-9