Table of Contents
Advertisement
Indicators
1
Gain indicators
The gain indicators in the viewfinder light as follows:
-
Gain is - (-3 or -6dB)
+
Gain is + (+6, +9, +12 or +18dB)
++
Gain is ++ (+9, +12,+18 or +24dB)
+ and ++
Gain is +++ (+30 or +36dB)[FT]
2
Top indicators
REC
lights when the camera is on-air.
TAPE lights when the studio ISO signal is received.
BATT lights if the supply voltage is less than 11V.
ND/RE lights when an ND optical filter or the lens
range extender is selected.
3
Iris indication
Indicates the value of the iris opening (when enabled
in the VF menu).
4
Zebra pattern
This diagonal line pattern warns the operator that the
area affected has risen above a predetermined level
of the full scale video exposure value. Level and
contrast are selected in the VF menu.
5
Safe area marker
The safe area marker indicates an area that
represents 80% of the whole viewfinder picture area.
This is the minimum area seen on a TV-set.
6
Non standard indicator
The non-standard video settings indicator (!) lights
when exposure is not set to nominal. It also lights
when black stretch or extended iris is on.
1-8
1
-
++
+
11
10
9
8
3.2
5.6
7.5
7
(+30, +36 or 42dB)[IT]
LDK 5301 User's Guide 1.5 Inch Viewfinder
2
REC
TAPE
ND/RE
BATT
FL
AW1
AW2
!
7
White Balance indicators
The white balance indicators light as follows:
3,2
- preset temperature of 3200K is selected
5,6
- preset temperature of 5600K is selected
7,5
- preset temperature of 7500K is selected
FL
- memory for fluorescent light is selected
AW1 - memory 1 is selected
AW2 - memory 2 is selected
None of these indicators light if AWC is selected.
8
Message box
The display time of this information message box is
set by the Info time item of the VF menu.
9
Centre marker
This cross marks the centre of the picture.
10
Cadre marker (only switchable cameras)
These dotted white lines show the limits of a 4:3
picture in the 16:9 mode, or the limits of a 16:9 picture
in the 4:3 mode.
11
Zoom indication
Indicates the degree to which the lens has been
zoomed in or out if this feature is supported by the
lens. It shows 50 if not supported.
3
4
5
6
02.30.5
Advertisement
Table of Contents
