Upper Oven Liner - GE Profile PB975 Technical Service Manual

Note: It is not necessary to remove the lower
oven vent tube to remove the lower oven smoke
eliminator.
To remove the lower oven vent tube, it is necessary
to remove the rear cover. (See
The lower oven vent tube is held to the back of the
range by a ¼-in. hex-head screw.
The lower oven smoke eliminator is attached to the
oven cavity by two ¼-in. hex-head screws.
.)
Rear Cover Removal
– 53 –

Upper Oven Liner

To remove the upper oven liner:
1. Disconnect power to the range.
2. Remove the range from its installation.
3. Remove the cooktop. (See
4. Remove the rear and side panels. (See
and
Cover Removal Side Panel Removal
5. Disconnect the wire harness from the door
switch.
6. Remove the upper oven lock assembly. (See
.)
Lock Assembly
7. Disconnect the 2 wire harnesses to the upper
lights.
8. Disconnect the sensor wire harness.
9. Remove wires from the upper oven bake and
broil elements.
10. Remove the two ¼-in. hex-head screws that
secure the liner to the rear wall of the range.
11. Using a fl at-blade screwdriver, push upwards
while pushing forward on the 2 metal hooks and
disengage them from the back wall of the range.
Remove
Disconnect
.)
Cooktop Assembly
Rear
.)