GE Profile PB975 Technical Service Manual page 23

Tone Volume
+
This feature allows you to adjust the tone volumes
to a more acceptable volume. There are three
possible volume levels.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time
until the display shows SF.
Touch the COOK TIME pad. The
display will show 2 BEEP. This is the
middle volume level.
Touch the COOK TIME pad again.
The display will show 3 BEEP.
This is the loudest volume level.
12-Hour, 24-Hour or Clock Blackout
+
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
OR
display, follow the steps below.
Touch the upper oven BROIL HI/LO
and BAKE pads at the same time
until the display shows SF.
Touch the TIMER/CLOCK or CLOCK
pad (depending on model) once.
The display will show 12 hr. If this
is the choice you want, touch the
START pad.
Auto Recipe
+
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
This feature is activated so that the display will
show the actual converted (reduced) temperature.
For example, if you enter a regular recipe
temperature of 350°F and touch the START pad,
the display will show CON and the converted
temperature of 325°F.
™ Conversion
™
– 23 –
Touch the COOK TIME pad again.
The display will show 1 BEEP. This is
the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate
the level shown.
Touch the TIMER/CLOCK or CLOCK pad
(depending on model) again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
Touch the TIMER/CLOCK or CLOCK pad
(depending on model) again to black
out the clock display. The display will
show OFF. If this is the choice you want,
touch the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
To deactivate the feature:
Touch the upper oven BAKE and
BROIL HI/LO pads at the same time
until the display shows SF.
Touch the CONVECTION BAKE
MULTI/1 RACK pad. The display
will show CON ON. Touch the
CONVECTION BAKE MULTI/1 RACK
pad again. The display will show
CON OFF.
Touch the START pad.
To reactivate the feature, repeat steps
1–3 above but touch the START pad when
CON ON is in the display.