Table of Contents
Advertisement
Choose to search for the
driver in the CD-ROM drive.
Click "Next."
The last window will confirm
the driver has been
installed. Click "Finish" to
close the add new hardware
wizard. Restart the
computer.
50
D
ATA TRANSFER MODE
The add new hardware
wizard will confirm the
location of the driver. Click
"Next" to install the driver in
the system.
• The letter designating the CD-
ROM drive will vary between
computers.
QuickTime system requirements
IBM PC / AT Compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
2000 Professional, or XP.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
Auto power save (data-transfer mode)
If the camera does not receive a read or write command within 30
minutes, it will shut down to save power. When the camera shuts down,
an unsafe-removal-of-device warning may appear on the computer
monitor. Click "OK." Neither the camera or computer will be damaged in
this operation.
Turn off the camera. Remake the USB connection by turning on the
camera.
When the my-computer window
is opened, a new removable-
disk icon will be displayed.
Double click on the icon to
access the camera's internal
memory or memory card; see
page 48.
To install QuickTime, follow
the instructions in the
installer. Macintosh users
can download the latest
version of QuickTime free of
charge from the Apple
Computer web site:
http://www.apple.com
51
Advertisement
Table of Contents
