Table of Contents
Advertisement
If your wireless adapter provides a WPS button,you may use the button to
perform PBC connection.
a).Run the adapter's UI and switch to STATION mode
b).Two minutes after the router's WPS-PBC is enabled,press the adapter's
WPS button to connect in PBC mode.
c).You may view the PBC connection process on the UI's PBC screen.
2. Wireless Connections in PIN Mode
On the "Add WPS Profile" screen, select "PIN " as the WPS Method. You may
select the wireless AP to be connected in WPS mode on the WPS AP
drop-down List,or select "Auto "and then click the next button.
2.1 Enrollee Mode
The PIN code field lists the adapter's current PIN code, when you select
"Enrollee" as the Config Mode, you need to copy this PIN code and input it in
the PIN code field of the router's WPS setting screen.
-46-
Advertisement
Table of Contents
