Table of Contents
Advertisement
Delete: to delete an existing MAC address in the list.
Remove All: to delete all clients' wireless MAC addresses in the list.
Add the MAC address of the client's wireless network adapter to the list and
select "All Allow" in the access policy drop-down list, computers whose
wireless MAC addresses are not included in the list will be rejected by default.
Select "All reject", and only the host computers whose wireless MAC
addresses are included in the list can not access the AP wireless network.
4.2.4 Associate List
When there's client connected to this AP and has successfully obtained the IP
address ,then the client's MAC address, AID and Status can be seen on the
list.
-40-
Advertisement
Table of Contents
