Table of Contents
Advertisement
Attaching and detaching the lens
To attach the lens
(See illustration – .)
1
Remove the rear and front lens caps and the
camera body cap.
You can attach/detach the front lens cap in two ways, (1)
and (2). When you attach/detach the lens cap with the lens
hood attached, use method (2).
2
Align the orange index on the lens barrel with
the orange index on the camera (mounting
index), then insert the lens into the camera
mount and rotate it clockwise until it locks.
Do not press the lens release button on the camera when
mounting the lens.
Do not mount the lens at an angle.
To remove the lens
(See illustration – .)
While holding down the lens release button on the
camera, rotate the lens counterclockwise until it stops,
then detach the lens.
Attaching the Lens Hood
It is recommended that you use a lens hood to reduce flare
and ensure maximum image quality.
Align the red line on the lens hood with the red line
on the lens (Lens hood index), then insert the lens
hood into the lens mount and rotate it clockwise until
the red point on the lens hood is aligned with the red
line on the lens and the lens hood clicks into place.
Attach the lens hood precisely or it may be ineffective or
appear in pictures.
When storing, fit the lens hood onto the lens backwards.
Advertisement
Table of Contents
