Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source - Insignia NS-26L450A11 User Manual

26"/32" LCD, 1080p
10 Press or to highlight Home Mode or Retail
Mode, then press OK/ENTER.
If you selected Retail Mode, a message appears
"If you select Retail Mode, then Energy saving is
not realized. " Select Yes to continue, or select No
to change your selection.
The Choose your TV source screen opens.
Choose your TV source
Antenna
Cable
Cable/Satellite Box
Scan for Digital Channels..
OK
MOVE
ENTER
Select Antenna if using an antenna for standard or HD TV
11 Press or to highlight Antenna, Cable, or
Cable/Satellite Box (if your cable TV uses a box,
select Cable/Satellite Box), then press
OK/ENTER. If you chose Antenna or Cable, your
TV automatically starts scanning for channels
available in your viewing area. If you chose
Cable/Satellite box, your TV does not need to
scan for channels.
During auto channel search, your TV searches
for digital channels first. When the digital
channel search is complete, a message appears
asking if you want to search for analog channels.
Select Yes to continue searching for analog
channels, or select No to stop searching for
channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight TV in the Input Source list, then press
OK/ENTER.
Note
You can select a different video input source.
0
Analog Channels
0
Digital Channels
SELECT PREVIOUS EXIT
MENU EXIT
or to
www.insigniaproducts.com

Understanding the basics

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns blue.
3 Press (power) again to turn off your TV. Your
TV enters Standby mode and the power
indicator LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The Input
Source list opens.
Input Source
Component
HDMI 1
HDMI 2
HDMI 3
VGA
USB
2 Press or to highlight a video input source,
then press OK/ENTER.
You can also press a direct input button to select
the video input source.
• Press TV to select TV.
• Press VIDEO to select AV.
• Press HDMI once to select HDMI 1. Press twice to
select HDMI 2. Press three times to select HDMI 3.
TV
AV
21