Remote Control - Insignia NS-26L450A11 User Manual

Remote control

# Item Description
Press to turn your TV on or off (Standby mode). When
1 your TV is off, power still flows into it. To disconnect
(power)
power, unplug the power cord.
2
Remote control indicator Lights when you press a button on the remote control.
Press to program the remote control to control
connected devices. For more information, see
3
SET
"Programming your universal Insignia remote control"
on page 10.
4
TV Press to control your TV.
Press to control a connected Blu-ray or DVD player. You
must program the remote control before this button
5
BD/DVD
works. For more information, see "Programming your
universal Insignia remote control" on page 10.
6
MENU Press to open the on-screen menu.
7
OK/ENTER Press to confirm selections or changes.
Press to move left, right, up, or down in on-screen
8
menus.
Press to display the program guide. For more
9 information, see "Displaying additional information"
GUIDE
on page 23.
10
TV Press to select TV as the video source.
Press to select the device connected to the CVBS or
11
VIDEO
S-VIDEO jack.
8
NS-26L450A11/NS-32L450A11 26"/32" LCD, 1080p
# Item
12
(stop)
13
PVR/LIST
14
(fast reverse)
15
/
16
17 VOL+/VOL–
18 MUTE
19 INPUT
20 FAV
21
AUDIO
22
SLEEP
23
DYN VOL
24 AUX
25 STB
26
INFO
27 EXIT
28 HDMI
29 COMP
30
(record)
www.insigniaproducts.com
Description
Press to stop playback on DVD, DVR, PVR, or CD
devices. You need to program the remote control to
control connected devices. For more information, see
"Programming your universal Insignia remote control"
on page 10.
Press to list all the recorded programs in a PVR/STB.
You need to program the remote control to control
connected devices. For more information, see
"Programming your universal Insignia remote control"
on page 10.
Press to fast reverse on DVD, DVR, PVR, or CD devices.
You need to program the remote control to control
connected devices. For more information, see
"Programming your universal Insignia remote control"
on page 10.
In DVD, DVR, PVR, or CD mode, press to skip back to the
previous title or track. You need to program the
remote control to control connected devices. For more
information, see "Programming your universal
(skip back)
Insignia remote control" on page 10.
In DVR mode, the behavior of this button depends on
how you programmed your remote control.
Press to pause playback on DVD, DVR, PVR, or CD
devices. You need to program the remote control to
control connected devices. For more information, see
"Programming your universal Insignia remote control"
on page 10.
Press to increase or decrease the volume.
Press to mute the sound. Press again to restore the
sound.
Press to open the Source List, then press
cycle through the available input sources. For more
information, see "Selecting the video input source" on
page 21.
Press to open the Favorite Channel list. For more
information, see "Setting up a favorite channel list" on
page 27.
Press to select Bass or Treble. For more information,
see "Adjusting sound settings" on page 25.
Press to set the sleep timer. You can select Off, 5, 10,
15, 30, 60, 90, 120, 180, or 240 minutes. For more
information, see "Setting the sleep timer" on page 36.
Press to select the level of Audyssey Dynamic Volume.
You can select Heavy, Medium, Light, or Off. For
information see "Adjusting sound settings" on
page 25.
Press to control a connected device. You need to
program the remote control to control connected
devices. For more information, see "Programming your
universal Insignia remote control" on page 10.
Press to control a connected set-top box. You need to
program the remote control to control connected
devices. For more information, see "Programming your
universal Insignia remote control" on page 10.
Press to display TV status information, such as the
channel number, channel name (if available), or signal
source. For more information, see "Displaying
additional information" on page 23.
Press to close the on-screen menu.
Press one or more times to select the device connected
to the HDMI 1, HDMI 2, or HDMI 3 jack.
Press to select the device connected to the Y/Pb/Pr
(component video) jacks.
In DVD, DVR, PVR, or CD mode, press to begin
recording. You need to program the remote control to
control connected devices. For more information, see
"Programming your universal Insignia remote control"
on page 10.
or to