Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Insignia NS-26L450A11 User Manual

26"/32" LCD, 1080p
# Item Description
Press to fast forward on DVD, DVR, PVR, or CD devices.
You need to program the remote control to control
connected devices. For more information, see
"Programming your universal Insignia remote control"
31
(fast forward)
on page 10.
In DVR mode, the behavior of this button depends on
how you programmed your remote control.
In DVD, DVR, PVR, or CD mode, press to skip forward to
the next title or track. You need to program the remote
control to control connected devices. For more
/ (skip
information, see "Programming your universal
32
forward)
Insignia remote control" on page 10.
In DVR mode, the behavior of this button depends on
how you programmed your remote control.
Press to start playback on DVD, DVR, PVR, or CD
devices. You need to program the remote control to
33
control connected devices. For more information, see
(play)
"Programming your universal Insignia remote control"
on page 10.
Press to change TV channels. For more information,
34 CH /CH
see "Selecting a channel" on page 23.
35
RECALL In TV mode, press to return to the previous channel.
Press to enter channel numbers and the parental
control password.
36 Numbers
When programming the remote control, press to enter
device and programming codes.
Press to enter a digital sub-channel number. For more
37 —
information, see "Selecting a channel" on page 23.
Press to turn closed captioning on or off. You can select
CC Off, CC On, or CC On when Mute. For more
38 CC
information, see "Turning closed captioning on or off"
on page 33.
If Parental Lock is turned on, when you enter the
39 P-LOCK correct password to unblock the channels, you can
press P-LOCK to block the channels again.
Press to select the aspect ratio. For more information,
40
ZOOM
see "Adjusting the TV picture" on page 23.
Press to select the video modes. You can select Vivid,
Standard, Energy Savings, Theater, Sports, or
41 PICT
Custom. For more information, see "Adjusting the TV
picture" on page 23.

Using the remote control

Installing remote control batteries

To install the remote control batteries:
1 While pressing the release button on the battery
compartment cover on the back of the remote,
lift the cover off the remote.
2 Insert two AA batteries into the battery
3 Replace the cover.

Aiming the remote control

To aim the remote control:
• Point the remote control toward the remote
control sensor on the front of your TV.
www.insigniaproducts.com
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
Warnings
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Notes
• Do not expose the remote control to shock.
• Do not expose the remote control to liquids and
do not use the remote control in an area with
high humidity.
• Do not place the remote control in areas of high
heat or direct sunlight. The heat may warp the
battery case.
• The remote control may not work correctly if
sunlight or bright light is shining on the remote
control sensor. To correct this problem, move
your TV or use the remote control closer to the
remote control sensor.
9