Insignia NS-26L450A11 Quick Setup Manual

26"/32" 1080p LCD HDTV

QUICK SETUP GUIDE

NS-26L450A11/NS-32L450A11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control
and 2 AA
batteries
Cleaning
cloth
Remote
control holder
AC Audio Component
cable
power cable
cord
TV stand and screws
(26" - 1; 32" - 3)
Quick Setup Guide Quick Setup Guide
Front features
Remote
Power
control sensor
indicator
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Align the stand on the TV base, then insert the metal tabs on the stand into
the designated slots on the TV base
3 Secure the stand to the screen with three screws provided.
(26" - 1 screw; 32" - 3 screws)
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the TV to its stand.
3 Remove the stand column, then install the TV base cover to keep dirt and
dust from entering your TV.
4 Secure the wall-mount bracket to the back of your TV using the screws
provided with the bracket.
Setting up your remote control
1 While pressing the release latch on the battery compartment cover on the
back of the remote, lift the cover off the remote.
2 Insert two AA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your existing universal remote
control
To program your existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information. See
your manual to program your universal insignia remote to control other devices.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Phi l i p s
RCA One for All Sony Comcast Dish Network Motorola TIVO
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 M1057 VIP508, VIP622 DRC800 Series 3, HD
PMDVR8, PDVR8
115 135 0464 8043 0463 720 0463 0091
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game station
Using HDMI (best)
Using component (better)
DirectTV
RC23
10463
Using composite (good)
Connecting an antenna
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.