Panasonic SC-HT07 Operating Instructions Manual page 9

Supplied
System cable
accessories
Note
• Use digital connection to enjoy Dolby Digital or DTS.
Notes on digital input
This unit can decode the following signals:
• Dolby Digital, DTS
• PCM, including PCM with sampling frequencies of 96
or 88.2 kHz
It cannot decode:
• Other digital signals, such as MPEG
• Dolby Digital RF signals from a laser disc player
SC-HT07
S-Video cable (not included)
Used to connect to the
S-VIDEO IN terminal on
a television.
S-VIDEO
MONITOR OUT IN IN
TV DVR / VCR1
(TV) IN (DVR) IN (DVD) IN
OPT 1 OPT 2 COAXIAL
DIGITAL IN
Coaxial cable (not
included)
Used to connect to the
DIGITAL COAXIAL
OUT terminal on a DVD
player to input audio
digital signals.
AC power supply cord
(x 1)
Used to connect to the
S-VIDEO OUT terminal
on a DVD player.
IN
DVD
Remote control transmitter
(x 1) (x 1)
The remote control
3
• Insert so the poles (+ and –) match those in the remote
control.
• Do not use rechargeable type batteries.
Use
Aim at the sensor, avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
Remote control signal sensor
^ SFC
POWER 8 INPUT SELECTOR MUSIC AV/MOVE TUNE TUNE
VIDEO IN L AUDIO IN R VCR 2
Note
• Keep the transmission window and the unit's sensor free from
dust.
• Operation can be affected by strong light sources, such as
direct sunlight, and the glass doors on cabinets.
Batteries
(x 2)
1
R6/LR6, AA, UM-3
2
2
VOLUME
DOWN
7 meters (23 feet)
Transmission window
UP PHONES
9