Changing Video Input Labels; Maintaining; Cleaning The Cabinet; Troubleshooting - Insignia 09-1082 User Manual

Changing video input labels

You can change the video input labels to make
them easier to identify. The labels appear when you
press INPUT to select the video input source.
To change the video input labels:
1 Press MENU, then press
Settings icon. The Settings menu appears.
Settings
Parental Controls
Time
Menu Settings
Input Labels
Computer Settings
Closed Caption
Reset to Factory
OK
Move
ENTER
Set various TV options.
2 Press to access the Settings menu.
3 Press or to highlight Input Labels, then
press or to open the Input Labels screen.
When the screen opens, the Input Source
column is highlighted.
Settings • Input Labels
Input Source
VGA
TV
AV
OK
Move
ENTER
Create labels for the devices connected to your TV.
4 Press or to highlight the video input source
you want to label.
5 Press or to move the cursor to the New
Label column, then press
label for the input source.
6 Press or to highlight Yes, then press
OK/ENTER. The label is changed.
7 Press MENU one or more times to return to the
previous menu.
8 Press EXIT to close the menu.
32
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV
or to highlight the
Picture Audio Channel Settings
Select Previous
MENU EXIT
Picture Audio Channel Settings
Current Label New Label
TV DV
Default
Antenna
Yes No
Select Previous
MENU EXIT
or to highlight a
www.insigniaproducts.com

Maintaining

Cleaning the cabinet

Wipe the front panel and other exterior surfaces of
your TV with a soft cloth lightly dampened with
lukewarm water. Never use a solvent or alcohol to
clean your TV. Do not spray insecticide near your TV.
Such chemicals may cause damage and
discoloration to the exposed surfaces.

Troubleshooting

Problem
No picture or sound
Picture is OK, but no
Exit
sound
Sound is OK, but no
color
The picture has
overlapped images
Picture has snow
Stripes on picture
Bad stereo or SAP
sound
Exit
Remote control does
not work
"Unsupported Mode"
appears on the screen
"No Signal" appears on
the screen
Image is not clear
Image is not centered
Picture has a few bright
or dark dots
Solution
• Check all cable connections.
• Make sure that your TV is turned on.
• Check the volume level and mute setting.
• Check the color control and adjust it.
• Check the program' s color features because it may be
a black and white movie.
• Make sure that the antenna is installed correctly. If
not, adjust the antenna towards the broadcasting
station.
• Check the antenna and its connection. If there are
problems, correct them. If all connections are tight,
the problem may be with a faulty antenna or cable.
• Check car traffic or neon signs that may disrupt the
image.
• Check for interference from other electronic devices,
such as radios and televisions, and keep magnetic or
electronic devices away from your TV.
• A long broadcast distance or interference from radio
waves can cause bad sound reception. Try changing
the mode to Mono.
• Remove obstacles between the remote control and
the remote control sensor on the front of your TV.
• Point the remote control at your TV's remote control
sensor.
• Install fresh batteries.
• Check the resolution and frequency of your computer,
and adjust it to the optimum resolution for your TV:
1360 × 768 at 60Hz (NS-19E430A10 ) or 1920 × 1080
at 60Hz (NS-22E430A10 ).
• Make sure that the cable is firmly connected to the
computer and TV.
• Adjust the phase control.
• Adjust the horizontal control.
• A few bright or dark dots on an LCD screen are
normal. It does not affect the operation of your TV.