Using The Remote Control; Installing Remote Control Batteries - Insignia 09-1082 User Manual

# Button Description
Press to turn your TV on or off (standby mode).
POWER
12 When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Press to turn closed captioning on or off. For more
information about closed captioning, see
CCD
13
"Selecting the closed captioning mode" on page 28
and "Setting closed captioning styles" on page 28.
Press to display the DTV electronic program guide.
14 GUIDE
For more information, see "Using the electronic
program guide" on page 22.
RECALL
15
Press to go the last viewed channel.
EXIT
16
Press to close the on-screen menu.
Press to mute the sound. Press again to restore the
MUTE
17
sound.
Press to go to the next or previous channel in the
CH /CH
18 channel list. For more information, see "Selecting a
channel" on page 15.
Press to select the aspect ratio. You can select
ZOOM
19 Normal, Zoom, Wide, Cinema, Panorama, or
Auto Zoom.

Using the remote control

Installing remote control batteries

To install remote control batteries:
1 Press in on the latch, then lift the battery
compartment cover.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
8
NS-19E430A10/NS-22E430A10 19" 720p LED HDTV/ 22" 1080p LED HDTV
3 Press down on the battery compartment cover
until it clicks into place.
Cautions
www.insigniaproducts.com
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.