Cleaning Discs; Troubleshooting; Frequently Asked Questions; Problems And Solutions - Insignia NS-BDLIVE01 User Manual

NS-BDLIVE01_09-0086_MAN_V1_ENGLISH.book Page 24 Wednesday, March 11, 2009 9:37 AM

Cleaning discs

• Before playback, wipe the disc outwards from the
center (not in a circle) with clean cloth.

Troubleshooting

Frequently asked questions

Question Answer
How do I play Connect a sound system to the HDMI, DIGITAL OPTICAL
multi-channel surround AUDIO OUT, DIGITAL COAXIAL AUDIO OUT, or L and R
sound? AUDIO OUT jacks.
Can I connect You cannot connect headphones and speakers directly to
headphones and your player. If you want to use headphones or speakers,
speakers to my player? connect a sound system to your player, then connect the
speakers or headphones to the sound system.
My TV has composite in, Composite video provides a good picture.
component in, and HDMI
Component video provides a better picture than
in jacks. Which should I
composite video.
connect my player to?
HDMI video provides the best picture, but it takes longer
for an HDMI picture to appear when you first start playing
a disc.
Can I play Blu-ray Discs You can play the discs if the video was recorded in
or DVDs that I bought in standard NTSC format. You cannot play:
another country?
• Blu-ray Discs that do not have a region code of A
• DVDs that do not have a region code of 1 or ALL
Can I play Blu-ray Discs The region management information for Blu-ray discs and
or DVDs that do not have DVDs video indicates that the disc conforms to industry
region codes? standards. You cannot play discs that do not conform to
industry standards or do not have a region code or
number.
What types of discs will Your player can play the following discs:
my player play?
• Blu-ray Disc-video
• DVD-video
• CD
• JPEG
• DVD-RAM (DVD video recording format, AVCHD
format, and JPEG)
• DVD-R/RW (DVD video format and DVD video
recording format)
• DVD-R DL (DVD video format and DVD video
recording format)
• DVD+R
• DVD+RW
• DVD+R DL
Your player can also play CD-Rs and CD-RWs that have
been recorded in one of the following standards:
• CD-DA
• MP3/WMA
• JPEG
You must close the session when you record CDs.
24
Insignia NS-BDLIVE01 Blu-ray Disc Player

Problems and solutions

Power
Problem
Player switches to
standby mode
No power
Operation
Problem
Remote control does not
work
Player does not work
Playback will not start,
or playback starts then
stops
Startup is slow
Disc tray opens
automatically while
playing a disc
www.insigniaproducts.com
Solution
• This is a power-saving feature. Press
STANDBY/ON on the front of your player to turn
your player on.
• Make sure that the power cord is plugged into a
working power outlet.
Solution
• Make sure that you point the remote control at
the remote control sensor on the front of your
player. For more information, see "Remote
control range" on page 4.
• Make sure that there is no obstruction between
the remote control and the remote control
sensor.
• Make sure that bright light does not shine on the
remote control sensor. Bright light can interfere
with signal reception.
• Make sure that colored glass is not in front of the
remote control sensor. Colored glass can
interfere with signal reception.
• The batteries may be dead. Replace the
batteries.
• A built-in safety device may have been
activated. Press STANDBY/ON on the front of
your player to turn it off, then turn it on again. If
your player still does not turn on, unplug the
power cord, wait about one minute, plug it in
again, then press STANDBY/ON on the front of
your player.
• Condensation may have formed inside your
player. Turn off your player and wait about two
to three hours for the condensation to
evaporate.
• If you see , the action you are trying is not
allowed by your player or the disc.
• Make sure that the disc is inserted with the label
facing up.
• Make sure that the disc is not dirty. To clean the
disc, see "Cleaning discs" on page 24.
• The disc may be blank or not compatible with
your player. For a list of compatible discs, see
"Playable discs" on page 6.
• Startup may be slow if the TV is connected to the
HDMI cable.
• Startup may be slow the first time you plug in
the power cord or after a power failure.
• Make sure that the disc is not dirty or scratched.
To clean the disc, see "Cleaning discs" on page
24.
• The disc may not compatible with your player.
For a list of compatible discs, see "Playable discs"
on page 6.
• Try resetting your player. Press STANDBY/ON,
wait five seconds, then press STANDBY/ON
again.