Page 1
Repaired or replaced products will receive a 60 day warranty. USER MUST BE USING THE PROPER NAILS FOR THIS WARRANTY TO BE VALID. WARRANTY IS VOID IF INCORRECT TYPE OF NAILS ARE USED. Visit us at surebonder.com for our full line of products Gauge ½” 1-3/8 Pin ”...
DANGER Troubleshooting Improper use of this nailer can result in death or serious injury. This manual contains important information about product safety. The following form lists the common operating system with problems and solutions. Please Read and understand this entire manual before operating this nailer read the form carefully and follow it.
Mode of Operation IMPORTANT SAFETY WARNINGS: This nailer is equipped with a contact safety mechanism and does not operate unless the contact continued mechanism is depressed. There is only one method of operation to drive nails with this nailer. - Intermittent operation (Trigger fire). Disconnect air hose from nailer: - Position the nail outlet on the workpiece with finger off the trigger.
Adjusting Air Pressure Loading Nails (continued) ! WARNING To load: Nailer has easy drop-in side loading. To open: push in track release button and slide track backward. Do not exceed 120 psi. Adjust the air pressure at recommended operating pressure 70 to 120 Drop strip of pin nails onto track magazine making sure that nails are flat against track.
Need help?
Do you have a question about the 9710 and is the answer not in the manual?
Questions and answers