Advertisement
WARRANTY
If you have any problems with this tool, please call FPC Corporation toll-free at
1-800-860-3838 before returning it to the place of purchase.
FPC Corporation warrants this product to be free from defects in material and
workmanship, under normal conditions of use and when used in accordance with
FPC operating instructions, for a period of 90 days from the date of purchase by the
user. Within the 90 day warranty FPC at its option shall repair or replace the
product. . The product must be returned at the distributor/user expense, either
within warranty or out. Repaired or replaced products will receive a 60 day
warranty. USER MUST BE USING THE PROPER FASTENERS FOR THIS WARRANTY
TO BE VALID. WARRANTY IS VOID IF INCORRECT TYPE OF FASTENERS ARE USED.
Visit us at surebonder.com for our full line of products
FPC Corporation - 355 Hollow Hill Drive - Wauconda, IL 60084
Phone: (847) 487- 4583
website: www.surebonder.com
Fax: (847) 487-0174
e-mail: sales@surebonder.com
1211
Model 7760 3 in 1 Nailer/Stapler
1"- 2-1/2" 16 gauge Finish Nailer
5/8"- 2" 18 gauge Brad Nailer
5/8"- 1-5/8" 18 gauge 1/4"Crown Stapler
Includes: Allen wrench(2) & pneumatic oil
Operating Instructions
Read All Safety Rules and Instructions Carefully
Save this manual for Future Reference
®
®
Advertisement
Table of Contents
Related Manuals for Surebonder 7760
Summary of Contents for Surebonder 7760
- Page 1 USER MUST BE USING THE PROPER FASTENERS FOR THIS WARRANTY TO BE VALID. WARRANTY IS VOID IF INCORRECT TYPE OF FASTENERS ARE USED. Visit us at surebonder.com for our full line of products 1”- 2-1/2" 16 gauge Finish Nailer 5/8”- 2”...
-
Page 2: Important Safety Warnings
DANGER Improper use of this tool can result in death or serious injury. This manual contains important information about product safety. Read and understand this entire manual before operating this tool. IMPORTANT SAFETY WARNINGS: THE SAFETY WARNINGS BELOW CANNOT COVER ALL POSSIBLE SITUATIONS THAT MAY OCCUR. - Page 3 IMPORTANT SAFETY WARNINGS: continued Disconnect air hose from tool: before performing maintenance when clearing a jam when tool is not in use when moving it to another location when handing tool to another person DO NOT place finger on trigger when disconnecting air hose - the tool could fire when reconnected to the air supply.
-
Page 4: Troubleshooting
APPLICATIONS Troubleshooting Including but not limited to: Casing, Cabinets, Door and Window Trim, Furniture Repair, The following form lists the common operating system with problems and solutions. Please read Baseboard, Carpet. the form carefully and follow it. WARNING: If any of the following symptoms appears during your operation, stop using the tool FEATURES immediately, or serious personal injury could result. -
Page 5: Operation
Brad Nail Staple 1/4” FASTENER SELECTION Use SUREBONDER 500 Series or any other brand 16 gauge - Finishing Nails 1" to 2-1/2” (25mm-64mm) Dial Use SUREBONDER 400 Series or any other brand 18 gauge - Brad Nails 5/8”to 2” (15mm-50mm) -
Page 6: Maintenance
Mode of Operation Adjusting Air Pressure This nailer is equipped with a contact safety mechanism and does not operate unless the contact mechanism is depressed. There is only one method of operation to drive fasteners with this nailer. ! WARNING - Intermittent operation (Trigger fire).
Need help?
Do you have a question about the 7760 and is the answer not in the manual?
Questions and answers