Surebonder 9760 Operating Instructions

Palm nailer

Table of Contents

Download this manual

Enlarged version

WARRANTY

If you have any problems with this tool, please call FPC Corporation

Toll-free at 1-800-860-3838 before returning it to the place of purchase.

FPC Corporation warrants this product to be free from defects in material and

workmanship, under normal conditions of use and when used in accordance with

FPC operating instructions, for a period of 90 days from the date of purchase by the

user. Within the 90 day warranty FPC at its option shall repair or replace product.

The product must be returned at the distributor/user expense, either within warranty

or out. Repaired or replaced products will receive a 60 day warranty.

Visit us at surebonder.com for our full line of products

FPC Corporation - 355 Hollow Hill Drive - Wauconda, IL 60084

Phone: (847) 487- 4583

website: www.surebonder.com

Fax: (847) 487-0174

e-mail: sales@surebonder.com

Model 9760 Palm Nailer

Drives Common Nails up to 7/16"(.4375) head diameter

Pneumatic Palm Nailer

Includes: Leather Cover, Oil, Allen Wrench

Read All Safety Rules and Instructions Carefully

Save this manual for Future Reference

0507

Operating Instructions

Table of Contents

Do you have a question about the 9760 and is the answer not in the manual?

Page 1 The product must be returned at the distributor/user expense, either within warranty or out. Repaired or replaced products will receive a 60 day warranty. Visit us at surebonder.com for our full line of products Pneumatic Palm Nailer Includes: Leather Cover, Oil, Allen Wrench...
Page 2: Troubleshooting
DANGER Storing Improper use of this nailer can result in death or serious injury. When not in use for an extended period of time apply a thin coat of pneumatic tool lubricant to This manual contains important information about product safety. the steel parts in order to avoid rust.
Page 3: Operating Nailer
IMPORTANT SAFETY WARNINGS: continued Operating Nailer Disconnect air hose from nailer: before performing maintenance. when clearing a jam. ! WARNING when tool is not in use. Do not depress the tip of the palm nailer with your hand. Depressing the tip will cause the when moving it to another location.
Page 4: Adjusting Air Pressure
AIR SUPPLY ! DANGER OPERATION NEVER use oxygen or other bottled gases. Explosion may occur. This nailer is designed to operate on clean, dry, regulated compressed air, between 60 and 100 APPLICATIONS psi. It is preferable to include an air filter, pressure regulator, and automatic oiler within 15 feet of the tool, if possible.