No
Parts
2
Fan and Motor
1) Do "1", above.
2) Remove the nut flange (Turn to the right to
3) Separate the fan.
4) Loosen four fixing screws to separate the
5) Loosen two fixing screws and seperate the
1) Do "1","2", above.
3
Heat Exchanger
2) Loosen two fixing screws of left and right
3) Disassemble the inlet and outlet pipe by
4) Separate the heat exchanger.
4
Compressor
1) Do "1", "2", "3", above.
2) Open the terminal cover of compressor and
3) Disassemble the inlet and outlet pipe of
4) Loosen the three bolts of the lower part.
5) Separate the compressor.
Samsung Electronics
Procedure
remove, as it is a left hand screw)
motor.
motor bracket from the base.
side.
welding.
unscrew the connection terminal.
compressor by welding.
Disassembly and Reassembly
Remark
3-7