Sony CMD-J7 Operating Instructions Manual page 55

01GB01COV-AE4.book Page 55 Wednesday, July 11, 2001 12:12 PM
The browser can be configured to access
WAP or HTML sites. The procedure to set up
the configuration depends on the server type.
See an example for WAP below.
1 Select WAP from the Main Menu. Then
select Settings.
2 Select the first field labeled Empty and
then select Edit.
3 Enter the Security Code (default 0000) at
the prompt (see also page 38).
4 Select Name to enter a name that will be
displayed for your site.
Name: My Provider
5 Select Home Page to enter the URL of the
home page specified by your Network
Operator/Service Provider.
Home Page: wap.myprovider.com
6 Select Server Type to select WAP or
HTML depending on which type of server
your provider has.
Server Type: WAP
7 Select Bearer Service to specify the
bearer type (Data or SMS) your Network
Operator/Service Provider requires.
Bearer Service: Data
8 Select Provider to set the following
parameters specified by your Network
Operator/Service Provider:
Dial Up Number: +12 345 67 890
(number to access the gateway)
ISP User Name: abc
ISP Password: sony
Data Call Type: Automatic
9 Select the arrow to return to the Edit
menu.
10 Select GW Server to enter the address of
the gateway server of your Network
Operator/Service Provider.
GW Server: 10.255.255.255
11 Select Security to choose On for a secure
connection to your gateway (GW port
9203) or Off for a non-secure connection
(GW port 9201) depending on your
Network Operator/Service Provider.
55 GB