T9 Text Entry - Sony CMD-J7 Operating Instructions Manual

01GB01COV-AE4.book Page 22 Wednesday, July 11, 2001 4:02 PM

T9 Text Entry

Sample entry with T9 Text Entry:
1 Proceed as in Create (see page 30), then
2 In step 3, press and hold
T9 mode if does not appear (or press
the Centre Key and select T9).
3 Press to shift to
.
4 To type the word
"Sony", press each of
the following keys in
order: , ,
.
5 At the end of the word, check the preview
bar for the possibilities found for the key
combination you typed.
6 Rotate the Jog Dial to select "Sony". If
your desired word is first on the list, just
press the Jog Dial to select it (or press
to enter a space and proceed with the
next word).
22 GB
If the word you intended to type does not appear in
the list, press and hold
mode and type the word using the standard text
entry method (see page 21). When finished, press
and hold
to switch to
will automatically be added to the T9 memory and
will appear in T9 mode next time.
Adding a symbol or punctuation
To insert a symbol when creating a message.
1 Press
2 Use the Jog Dial to scroll from row to
row.
,
3 Press the Jog Dial to select a row.
4 Rotate the Jog Dial to scroll within the
row.
5 Press the Jog Dial to select a symbol.
For "Smart Punctuation", just press
would add a fullstop, hyphen or apostrophe. T9 will
automatically insert the most likely punctuation.
to switch to multi-tap
to return to T9 mode. This new word
.
where you