York Active 110 Owner's Manual page 11

Key Function:
KEYS
MODE
SET
RESET
RECOVERY
Display:
DISPLAY DESCRIPTION
SCAN Display all functions from RPM
RPM Displays the Rotation Per Minute. The RPM and SPEED will switch every 6
seconds during workout.
SPEED Displays the current training speed. Maximum speed is 99.9KM/H.
TIME Without a preset target, it will display the time exercised during your
workout. In target mode, it will display the value left to your preset target.
DISTANCE Without a preset target, it will display the distance traveled during your
workout. In target mode, it will display the value left to your preset target.
CALORIE Without a preset target, it will display the calories burned during your
workout. In target mode, it will display the value left to your preset target.
PULSE Displays your pulse rate in beats per minute during your workout.
TEMPERATURE Displays the current room temperature
CALENDAR Displays the current date
CLOCK Displays the current time
Program select and setting Value
1. Use the MODE button to select a function: RPM
2. Use the SET button to select a value.
3. Press MODE again to confirm value and skip to next function.
4. The count down will begin when you start pedalling.
5. When you reach the target, the computer will produce beep sounds and then stop.
Wake-Up Function
The monitor will entry SLEEP mode (LCD off) when there is no signal input and no key be pressed
after 4 minutes. Press the screen to start the monitor.
FUNCTIONS
Press "MODE" button to select an option.
To select a value during setup. You can hold the button to increase the
value faster. (The computer has to be in stop condition)
The user may press "RESET" button to reset each function or hold on for
2 seconds to reset all functions.
Press the key to activate heart rate recovery function.
www.yorkfitness.com
SPEED DISTANCE
> >
SPEED DISTANCE
> >
CALORIES PULSE
> >
CALORIES PULSE
> >
11