Accessories; Standard Accessories; Optional Accessories - Hitachi DH 24PB Instruction Manual

English
WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1)Case (Molded plastic) (Code No. 307786) ...............................................................1
(2)Side Handle (Code No. 303659) ............................................................................... 1
(3)Depth Gauge (Code No. 303709) ............................................................................. 1

OPTIONAL ACCESSORIES ...........

1. Drilling anchor holes (Rotation + Striking)
Drill Bit (Slender shaft)
(1) Drill Bit (Slender
Shaft)
Outer diameter
1/8"
(3.4mm)
9/64"
(3.5mm)
Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
18

ACCESSORIES

Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous
and could cause injury or mechanical damage.
(2) Adaptor for slender shaft
(SDS-plus shank)
(1) Drill Bit (Slender Shaft)
Effective Length Overall Length
1-25/32"
(45mm)
1-25/32"
(45mm)
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
sold separately
Code No.
3-35/64"
306369
(90mm)
3-35/64"
306368
(90mm)
(2) Adaptor for
Slender Shaft
Code No.
306370