Maintaining Your Shelf System - Insignia NS-A2113 User Manual

Insignia mini-shelf system with 3-cd changer and am/fm tuner user guide
Table of Contents

Advertisement

Available languages

Available languages

Insignia NS-A2113 Mini-Shelf System
Problem
The CD skips
during play
No sound or
poor sound on
the radio

Maintaining your shelf system

Note
Cleaning the case
Wipe with a soft cloth. If the case is very dirty, moisten the cloth with a
weak solution of non-caustic detergent and water.
Cleaning the lens
A dirty lens can cause skipping and can even stop the CD player from
working.
To clean dry particles and dust from the lens:
1 Open the CD cover.
2 Use a camera lens puffer-brush to blow repeatedly on the lens,
then wipe with the brush to remove dust.
3 Blow again to remove loose particles.
To clean fingerprints from the lens:
If the lens does not come clean with the puffer-brush, wipe it
with a soft cotton cloth.
Possible cause
The CD or lens is dirty.
Strong shaking or vibrations
The CD player is programmed
to skip a track.
The station is not tuned in
correctly.
FM—The antenna is not
correctly adjusted.
AM—The player is not
positioned for good reception.
The mechanical part of this shelf system contains
self-lubricating bearings and must not be oiled or lubricated.
www.insignia-products.com
Solution
Clean or replace the CD, or clean
the lens.
Place the shelf system on a flat and
stable surface without vibration.
Quit the Program mode.
Retune the station.
Adjust the FM antenna for better
reception.
Rotate the player for better
reception.
17

Advertisement

Table of Contents
loading

Table of Contents