Operation; Connecting The Hose; Vacuum Cleaner - Makita BVC340 Instruction Manual

Connecting the hose

CAUTION:
Do not force the hose to bend it and/or stamp it.
•
Forcing and/or stamping the hose may cause
deformation or damage to the hose.
Do not pull the hose to carry the cleaner. Pulling
•
the hose may cause deformation or damage to the
hose.
B
1
2
1. Dust outlet
2. Power tool
011119
Insert the "A" end of the hose to the suction opening of
the cleaner and turn it clockwise all the way until it locks.
Attach the cuff on the "B" end of the hose and then
connect it to the dust outlet of an power tool.
Replacing the front cuff
Change the front cuff of the hose according to the dust
outlet size of a power tool you use.
1
2
011120
To remove the front cuff, hold the hose and turn it
counterclockwise.
To mount the front cuff, turn it clockwise and then screw
it in until it stops.
A
1. Front cuff
3
2. Hose
3. Remove
4. Install
4

OPERATION

WARNING:
Do not use the shoulder strap when working in a
•
high place.
When using the cleaner as a stationary cleaner,
•
place it on a flat and stable surface

Vacuum Cleaner

011122
When using the cleaner as a portable cleaner,
cross-hanging the shoulder strap before the breast is
difficult to drop the cleaner.
1
2
4
5
011123
NOTE:
Long cut-off decorative paper that may be
•
produced by plaster board cutting work depending
on the conditions of workpiece to be cut and that
may be stuffed inside the hose may cause the hose
suction blocking. When this occurs, change the
8
1. Decorative
paper
2. Saw blade
3. Base
4. Cutting depth
5. Plaster board
3