Table of Contents
Advertisement
TG9361BX(e)_OI.book Page 24 Wednesday, April 16, 2008 3:08 PM
Programming
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
1
Handset:
{MENU} i {#}{1}{3}{0}
2
Base unit:
Press and hold {LOCATOR} for 4
seconds. (No registration tone)
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step should be
completed within 90 seconds.
3
Handset:
Press {OK}, then wait until a long
beep sounds.
4
{OFF}
Note:
L While registering, "Base
registering" is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored in the
base unit. This allows the handset to end
its wireless connection with the system.
1
{MENU} i {#}{1}{3}{1}
2
{3}{3}{5} i {OK}
3
Select the handset you want to
cancel by pressing the desired
handset number.
24
Advertisement
Table of Contents
