Using The Smart Setup Wizard - NETGEAR WGT624 v3 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
If you don't connect successfully,
1. Go through the settings and make sure you've selected the correct options and typed
everything correctly.
2. Contact your ISP to verify the configuration information.
3. Read the Troubleshooting section in the Router Installation Guide.
4. On the Router GearBox CD, read the Troubleshooting Guide or the Troubleshooting section in
the Reference Manual.
5. Contact NETGEAR Technical Support.

Using the Smart Setup Wizard

You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection. The Smart Setup Wizard is not the same as the Smart Wizard configuration assistant
that only appears when the router is in its factory default state. After you configure the wireless
router, the Smart Wizard configuration assistant will not appear again.
To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection settings, follow this procedure:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field of
your browser, then click Enter.
2. For security reasons, the router has its own user name and password. When prompted, enter
for the router user name and
admin
letters. To change the password, see
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
WGT624 v3 wireless router and display the home page as shown in
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, see
3-10
for the router password, both in lower case
password
"Changing the Administrator Password" on page
Chapter 8, "Troubleshooting".
v3.0, December 2005
Figure 3-5 on page
Connecting the Router to the Internet
6-7.
3-5.