What You Need Before You Begin; Updating Your Router Firmware; Two Setup Methods: Smart Wizard Setup Or Manual Setup - NETGEAR MR814 802.11b Cable/DSL Wireless Router MR814 MR814 Setup Manual

Wireless Router Setup Manual

What You Need Before You Begin

Prepare the following before you set up your router:
• Internet service.
• The configuration information your Internet Service Provider (ISP) gave you. Depending on
how your Internet account was set up, you might need one or more of these settings for the
wireless router to access the Internet:
— Host and domain names
— Internet login name and password (frequently an e-mail address and password)
— Domain Name Server (DNS) addresses
— Fixed or static IP address
Your ISP should have provided you with all the information needed to connect to the Internet.
If you cannot locate this information, you can ask your ISP to provide it.
• For cable modem service, use the computer you first used to set up your Internet service.

Updating Your Router Firmware

NETGEAR is always improving the operability and features included with your router. To make it
easy for you to receive the best, most up-to-date features of your router, NETGEAR provides a
variety of methods for updating your product.
• The Smart Wizard installation assistant lets you check for and install updates as part of the
setup activity.
• The router includes an update feature that lets you check for and install updates. You must be
logged in to the router to use this feature.
These options are discussed in
New Firmware" on page
Two Setup Methods: Smart Wizard Setup or Manual
Setup
You have two methods available for setting up your wireless router:
6
"Accessing the Wireless Router after Installation and Checking for
13.
v1.0, August 2007
Getting to Know Your Wireless Router