Selecting The Video Output Resolution - Insignia NS-BRDVD4 User Manual

Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player

Selecting the video output resolution

To select the video output resolution:
1 Press ENTER. The Settings menu opens.
2 Press
opens.
3 Press
4 Press
TV type
If your TV is a high-definition TV (HDTV) connected to the
HDMI jack on your player and you want your player to set the
output resolution based on information exchanged between
the TV and your player over the HDMI cable
If the TV is a high-definition TV (HDTV) capable of 1080p (any
frame rate) connected to the HDMI jack on your player
If your TV is a high-definition TV (HDTV) capable of 1080i only 1080i
If your TV is a high-definition TV (HDTV) capable of 720p only 720p
If your TV is an enhanced-definition
TV (EDTV)
If your TV is a standard-definition NTSC TV (American or Asian
SD TV)
5 Press
or to select Display, then press ENTER. The Display menu
or to select Resolution, then press ENTER.
or to select the resolution you want, then press ENTER.
Notes
to go to the previous menu.
www.insigniaproducts.com
Resolution
HDMI Auto
1080p (HDMI)
480p
480i
• Selecting a resolution the TV does not support could
result in an unstable picture or loss of the picture. See the
documentation that came with the TV to find the
resolutions the TV supports.
• Only the HDMI output on your player supports 1080p
video output at any frame rate. If the TV is connected to the
component output, the video output is limited to 1080i or
lower.
31