Lenovo ThinkPad User Manual page 8

3. Close the display and turn the computer over.
4. Remove the battery.
5. Remove the screw that secures the hard disk drive.
6. Remove the cover, then remove the hard disk drive by pulling on the tab.
7. Detach the side rubbers from the hard disk drive.
8. Unpack the new hard disk drive.
Attention
Before you unpack the hard disk drive, be sure to read "Handling
the hard disk drive" on page 1-1.
9. Attach the side rubbers to the new hard disk drive.
10. Insert the hard disk drive with the attached side rubbers into the hard
disk drive bay; then firmly install them and replace the cover.
11. Reinstall the screw.
Note: You can replace the screw with a security screw to prevent the hard
disk drive from being easily removed. The security screw may not
be included in your ship group. However, you can purchase screws
directly from NABS at www.nabsnet.com.
12. Reinstall the battery.
13. Connect the ac adapter and cables to the computer.
1-2
ThinkPad Hard Disk Drive: User's Guide