CleanForce CF1400 Instruction Manual page 5

ASSEMBLY AND OPERATING INSTRUCTIONS
3
Attach gun holder and power cord bracket.
5
Attach high pressure hose to the gun assembly
(hand tighten only).
7
Attach the garden hose to the water inlet(
hand tighten only).
4
Attach high pressure hose to the machine's
water outlet (hand tighten only)
6
Insert choice of wand to the gun and twist
¼ turn to lock in position.
7
ASSEMBLY AND OPERATING INSTRUCTIONS
8
Attach garden hose to water supply and
turn water on.
10
Completely unwind power cord and plug the
GFCI into an outlet, ensure there are no other
items using this circuit.
12
ON
Turn switch to ON position.
9
OFF
Make sure the ON/OFF switch is in the
OFF position.
11
Depress trigger until there is a steady
stream of water.
CAUTION
Drain unit after each use (for
storage): remove water
connection, turn ON the
machine for a few seconds
and press gun trigger to bleed
remaining water in the pump.
Turn OFF immediately.
8