Introduction - Toro 74621 Operator's Manual

This machine is a ride-on, rotary-blade lawnmower
intended to be used by homeowners in residential
applications. It is primarily designed for cutting grass
on well-maintained lawns. It is not designed for cutting
brush, mowing grass and other growth alongside
highways, or for agricultural uses.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Important: This engine is not equipped with a
spark arrester muffler. It is a violation of California
Public Resource Code Section 4442 to use or operate
the engine on any forest-covered, brush-covered, or
grass-covered land. Other states or federal areas
may have similar laws.
This spark ignition system complies with Canadian
ICES-002.
WARNING
Removing standard original equipment parts and
accessories may alter the warranty, traction, and
safety of the machine. Failure to use original Toro
parts could cause serious injury or death. Making
unauthorized changes to the engine, fuel or venting
system, may violate EPA and CARB regulations.
Replace all parts including, but not limited to, tires,
belts, blades, and fuel system components with
original Toro parts.
Gross Horsepower
The gross or net horsepower of this engine was
laboratory rated by the engine manufacturer in
accordance with the Society of Automotive Engineers
(SAE) J1940. As configured to meet safety, emission,
and operating requirements, the actual engine torque on
this class of mower will be significantly lower.
Go to www.Toro.com to view specifications on your
mower model.
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420

Introduction

Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a dealer,
or to register your product.
Whenever you need service, genuine Toro parts,
or additional information, contact an Authorized
Service Dealer or Toro Customer Service and have
the model and serial numbers of your product ready.
Figure 1 identifies the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
1. Model and serial number plate
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury
or death if you do not follow the recommended
precautions.
1. Safety alert symbol.
2
1
G014523
Figure 1
Under the seat
Figure 2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved