Hitachi H 65SD Instruction Manual And Safety Instructions page 7

15. Carefully handle power tools.
Should the power tool be dropped or struck against hard materials inadvertently, it
may be deformed, cracked, or damaged.
16. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine, carbon tetrachloride, and alcohol may
damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry
thoroughly.
17. NEVER touch the accessory, such as a bull point, a cutter, etc., with bare hands after
operation.
18. NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string,
etc.
19. ALWAYS attach the side handle and securely grip the Demolition Hammer.
20. ALWAYS wear eye protectors during operation.
21. ALWAYS be careful with buried object such as an underground wiring.
Touching these active wiring or electric cable with the power tool, you may receive an
electric shock.
Comfirm if there are any buried object such as electric cable within the wall, floor or
ceiling where you are going to operate here after.
22. Definitions for symbols used on the power tool
V ............ volts
Hz .......... hertz
A ............ amperes
W ........... watt
........... Class II Construction
English
7