6/ Loading The Regenerating Salt - Mastercook Dishwasher Instructions For Use Manual

EN EN

6/ LOADING THE REGENERATING SALT

Loading the regenerating salt
•
(Fig. 06)
Important :
Only use special dishwasher regener-
ating salt. Do not use table salt or any type
of cooking salt: this could damage your
appliance's water softener.
A
Unscrew and remove the stopper on the
salt tank.
B
Fill the tank with regenerating salt spe-
cially designed for dishwashers.
C
Use the funnel supplied with your dis-
hwasher. The first time, top up with water up
to the rim of the tank.
• Regenerating salt indicator :
This illuminates when salt must be added.
After the tank has been filled with regenerat-
ing salt, the indicator light may remain lit until
the salt has dissolved sufficiently, usually after
one cycle (of if the tank has not been filled
completely; for example, when first putting the
machine into service using the sample).
This can be deactivated as indicated in the
paragraph "For multi-purpose products" set-
ting table.
Important :
If the salt overflows when filling the
tank, to avoid oxidization of the tub it is
advisable to remove the salt crystals or to
run a Soaking programme.
Fig. 06
12
A
B
C