For Multi-Purpose Products - Mastercook Dishwasher Instructions For Use Manual

EN EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER

• FOR MULTI-PURPOSE PRODUCTS:

• Your appliance can be specially set to use multi-purpose if the water hardness is
< 25°F or < 2,5 mmo/l.
Advice:
To provide better coverage of the wide range of multi-purpose products available, your
dishwasher's "4-in-1" option has two possible settings, accessible via the "Set" button.
"Extra Dry"
improves the drying results in the event of reduced performance from the "2-in-1", "3-in-1"
or "4-in-1" types of multi-purpose product.
"Sparkling Clean"
multi-purpose product used.
• Proceed as follows to adjust the water softener on the control panel:
— Turn the selector to the "Opcje" position. The screen now displays SEL to indicate that you are
in the setting mode.
— Press the "opóźniony start" button
— To use multipurpose tablets you must select setting H0 or HI or H2, according to the hardness
of the water.
— To change this setting (according to the hardness of the water) continue to press the "opóźniony
start" button. The setting changes every time you press the button.
: (light off) deactivates the "TABS" function.
: (light on) activates the "TABS" function with the setting "Extra Dry".
: (flashing light) activates the "TABS" function with the setting "Sparkling Clean".
— The setting is automatically validated when you exit "Opcje", namely, when the selector is in the pro-
gramme or Stop position.
— The setting selected will be applied automatically; the "TABS" light will come on.
Important :
The multi-purpose products setting enables you to deactivate the rinsing and salt warning
lights only on H0 and " T
• Loading multi-purpose tablets
To make loading the detergent easier, the distributor is located on the front of the upper basket; it
is compatible with all the products recommended for your dishwasher.
• Place the tablet
ration, pull out the distributor's drawer and lay the tablet there. (Fig 05 on previous page).
- Close the distributor.
enables you to prioritise the sparkle of your crockery whatever the type of
. The screen now displays the setting (factory setting of H4 ).
Testing strip
Hardness
Multi-purpose products
Function Deactivated
Multi-purpose products
"Extra Dry"
Multi-purpose products
"Sparkling Clean"
".
ABS
in the external compartment (Fig 04 on previous page) or, for optimum ope-
OPTION
0-10°F
0-1 mmol/l
H0
H0
H0
11
10-18°F 18-25°F
1-1.8 mmol/l 1.8-2.5 mmol/l
H I H2
H I H2
H I
H2