LG LTC22350 Series Owner's Manual page 16

Fig. 13
• At this point, remove the Decorative Bolt on bottom on
refrigerator housing from the left side of refrigerator
(See Fig. 14). You will need this hole for the Bottom
Hinge.
Fig. 14
Decorative
Bolt
• Move the Bottom Hinge to the left side of housing
keeping the same orientation, and reattach with three
bolts (Fig. 15). Now move decorative bolt to hole on
lower right side of housing.
Fig. 15
• Turn refrigerator door upside down on a non-
scratching surface.
• With door upside down, loosen the 2 screws and
remove the door closer (stop) (See Figure 16), then
loosen the other two screws to remove the bottom
Hinge Pin Insert Bracket with Hinge Pin Insert
(Fig. 17).
NOTE: The Refrigerator door closer (stop) is not used on
all models. The model you have may not include this
part.
REFRIGERATOR INSTALLATION
14
Fig. 16
• Take out the Hinge Pin Insert and move the Bracket
to the other side of the door, keeping the same
orientation (See Fig. 17).
Fig. 17
Hinge Pin Bracket
• Place Hinge Pin Insert into the left side of the bracket,
tighten Hinge Pin Bracket to door (Fig. 18).
Hinge
Pin
Insert
• Take Door Closer/stop and flip (See Fig. 19). Line up
screw holes and mount on left side of door bottom
with the two screws. Turn door upright. It is now ready
for reattaching.
Fig. 19
Door Closer (Stop)
Door Closer (Stop)
Hinge
Pin
Insert
Fig. 18
Hinge Pin
Bracket