Sleep Timer Function; Care And Maintenance - LENCO IPT-6 User Manual

Sleep timer
This feature allows you to fall asleep while listening to the radio or iPod / iPhone for up to 90
Minutes.
The device shuts off automatically when this time expires.
How to activate the Sleep timer:
1. Press the POWER
2. Either tune to the desired radio station in the radio mode or playback music from the iPod /
iPhone.
3. Select the sleep timer to turn off the device after 15, 30, 45, 60 or 90 minutes, by pressing
the SLEEP button repeatedly.
4. To view the remaining sleep time, press the SLEEP button once.
5. To turn the device off before the sleep timer counts down to zero, press the POWER
button at any time.
Notes:
If you are falling asleep with music from an external device connected to the AUX input, the
sleep timer will shut off the power to this unit, but it will not turn off the external device.
Do not subject the device to excessive force, shock, dust or extreme temperature.
Do not manipulate the internal components of the device.
Clean your device with a damp (never wet) cloth. Solvent or detergent should never be
used.
Avoid leaving your device in direct sunlight or in hot, humid or dusty places.
Keep your device away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
Resetting the Device
If the device experiences a power surge or electric shock, it is possible that the internal micro-
controller may lock up and the device will not respond anymore to any commands from the panel
controls.
1. In this event, unplug and then reconnect the AC power plug into the wall outlet.
2. Use a straightened paper clip, toothpick or similar objects to press the RESET button
located at the rear of the main device (see the figure below). The reset operation clears the
system memory and all of your previous settings will be erased.
CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS THE RESET BUTTON.
IT MAY DAMAGE THE RESET SWITCH INSIDE THE DEVICE.

Sleep Timer Function

button to turn the device on.

Care and Maintenance

RESET button
11