Listening To External Audio Source; 3D Sound Effect; Clock Setting - LENCO IPT-6 User Manual

4. Connect the other end of the yellow RCA cable to the VIDEO IN of the television or video
display.
5. Press the FUNC button to select iPod/iPhone mode.
6. Select a movie from your iPod/iPhone menu.
7. The movie will playback on the Apple device screen.
8. Press the VIDEO OUT ON/OFF button to toggle between the video out "ON" to watch the
movie on the TV, and video out "OFF" to watch movie on the Apple device screen.
Note:
- For earlier iPod models with video (with click wheel):
(a) choose video in the main menu, then select video setting.
(b) Set the TV Out section to "ON".
(c) Switch back to the movie library and playback a movie of your choice.
- For iPod Touch, iPhone: TV OUT is automatically set to "ON". The TV OUT setting is not
available for user's selection.
1. Connect an audio cable (not included) with a 3.5mm stereo plug from an auxiliary audio device
to the AUX IN jack on the rear of the device.
2. Press the POWER
3. To select auxiliary audio input, press the FUNC button. The "AUX" indicator will appear on the
display.
4. Turn on the external auxiliary audio device.
5. The volume can be controlled through the device.
Operate all other functions on the external device as usual.
Notes: Press the POWER
Don't forget to switch off the power of the external audio device as well.
This model uses the wave field synthesis (WFS) technology to produce 3D sound effect.
In either iPhone / iPod, Aux-In or Radio mode, you may press the 3D button to enable / disable
the 3D sound effect. The LED display will respectively show on / off shortly.
When the device is OFF (Standby mode):
Set 12/24 Hour format
1. Press the MODE button entering 12/24 hour format setting mode.
2. Press the VOL
Set Clock
3. Press the MODE button again. The clock digits will blink.
4. Press the TUN
5. Press the VOL
Exit setting mode
7.To save all settings, press the MODE (or SNOOZE) button or wait for a few seconds to exit the
setting mode.
Listening to an External Audio Source
button to turn on the device.
button to turn off the device when you finish listening.

3D Sound effect

Clock Setting

/ to select 12 or 24 hour display format.
/ button to set the right hourtime.
/ button to set the right minutetime.
9