Specifications - Sony DAV-HDX589W Operating Instructions Manual

Speci1fications
AUDIO POWER SPECIFICATIONS
for the
u.s.
model
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
Inputs (Analog)
TVNIDEO (AUDIO IN) Sensitivity: 450/250 mV
AUDIO IN Sensitivity: 250/125 mV
Inputs (Digital)
TVNIDEO (COAXIAL IN/OPTICAL IN)
Impedance: 75 ohms/-
Input Stream: Dolby
Digital 5.lchlDTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
-
: :::s
0'
...
3
Q)
-
c i"
::::s
-
VIDEO: I Vp-p 75 ohms
COMPONENT:
Y: I Vp-p 75 ohms
PB/CB, PRIeR: 0.7 Vp-p
75 ohms
HDMI OUT: Type A (19
pin)
PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range
North American models: 87.5 MHz - 108.0 MHz
(100 kHz step)
Other models: 87.5 MHz - 108.0 MHz (50
kHz step)
Antenna (aerial) FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
North American, Mexican, and Latin American
models:
530kHz-I,7IOkHz(with
the interval set at 10kHz)
531 kHz-I,7IOkHz(with
the interval set at 9 kHz)
European, CIS, and Middle Eastern models:
531 kHz - 1,602 kHz (with
the interval set at 9 kHz)
Australian and New Zealand models:
531 kHz- 1,7 10 kHz (with
the interval set at 9 kHz)
530 kHz - 1,710 kHz (with
the interval set at 10kHz)
Other models: 531 kHz - 1,602 kHz (with
the interval set at 9 kHz)
530 kHz - 1,610 kHz (with
the interval set at 10 kHz)
Antenna (aerial) AM loop antenna (aerial)
Intermediate frequency 450 kHz
Video Section
Outputs
Super Audio CD/DVD System
Laser Diode Properties Emission Duration:
Continuous
Laser Output: Less than
44.61l W
*
This output is the value measurement at a distance
of 200mm from the objective lens surface on the
Optical Pick-up Block with 7mm aperture.
Signal format system NTSC
Tuner Section
System
Accepts low- and high-
impedance headphones.
RMS output power
FUFRJC*: 144 watts (per
channel at 3 ohms,
1
kHz,
10% THD)
Subwoofer*: 280 watts (at
1.5 ohms, 80 Hz, 10%
THD)
With 3 ohms loads, both
channels driven, from 180
- 20,000 Hz; rated 84 watts
per channel minimum
RMS power, with no more
than 0.7% total harmonic
distortion from 250 milli
watts to rated output.
108 W
+
108 W (at 3 ohms,
I kHz, 1% THD)
RMS output power
FUFRJC*: 144 watts (per
channel at 3 ohms, I kHz,
10% THD)
Subwoofer*: 280 watts (at
1.5 ohms, 80 Hz, 10%
THD)
*
Depending on the decoding mode settings and the
source, there may be no sound output.
Outputs (Analog)
Phones
Other models:
Stereo mode (rated)
Surround mode (reference)
Amplifier Section
U.s. models:
Surround mode (reference)
ggus