Sony DAV-HDX589W Operating Instructions Manual page 95

Symptom
A disc does not start playing
from the beginning.
The system starts playing the
disc automatically.
Playback stops automatically.
You cannot perform some
functions such as stop, search,
Slow-motion Play, or Repeat
Play.
Messages do not appear on the
TV screen in the language you
want.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed.
The subtitle cannot be turned off.
The angles cannot be changed.
A disc cannot be ejected and
"LOCKED" appears in the front
panel display.
[Data error] appears on the TV
screen when playing a DATA
CD or DATA DVD.
The system does not work
normally.
The Control for HDMI function
does not work.
Remedy
o
Program Play, Shuffle Play, or Repeat Play has been selected.
Press CLEAR to cancel these functions before playing a disc.
o
Resume Play has been selected.
During stop, press. on the unit or the remote and then start playback
(page 47).
o
The title, DVD or PBC menu automatically appears on the TV screen.
o
The DVD features an auto playback function.
o
Some discs may contain an auto pause signal. While playing such a disc, the
system stops playback at the auto pause signal.
o
Depending on the disc, you may not be able to perform some of these
operations. Refer to the operating instructions supplied with the disc.
• In the Setup Display, select the desired language for the on-screen display in
[OSD] under [LANGUAGE SETUP] (page 60).
• Multilingual tracks are not recorded on the DVD being played.
• The DVD prohibits changing the language for the sound track.
• Multilingual subtitles are not recorded on the DVD being played.
• The DVD prohibits changing the subtitles.
o
The DVD prohibits turning off subtitles.
• Multi-angles are not recorded on the DVD being played (page 45).
o
The DVD prohibits changing the angles.
• Contact your Sony dealer or local authorized Sony service facility.
• The MP3 file/IPEG image file you want to play is broken.
o
The data is not MPEG 1 Audio Layer 3 data.
• The IPEG image file format does not conform to DCF.
• The file has the extension ".jpg" or ".jpeg," but is not in IPEG format.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
• When "HDMI" does not light up in the front panel display, check the HDMI
connection (page 26).
• Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 63).
• Make sure that the connected component is compatible with the [CONTROL
FOR HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component's setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HOMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in
[HDMI SETUP] to [OFF], then set [CONTROL FOR HDMI] in [HDMI
SETUP] to [ON] (page 63).
• For details, see "Using the Control for HDMI Function for "BRAVIA" Sync"
(page 70).
-
-
: :s
0-
""I
3
£l)
-
o '
::s
95 US