Panasonic ES‑LV81 Operating Instructions Manual page 10

Cleaning the shaver without the self‑cleaning recharger
We recommend that you clean your shaver with the self‑cleaning
recharger or the sonic vibration cleaning mode when the faucet
symbol appears on the LCD panel.
1. Disconnect the power cord from the shaver.
. Apply some hand soap and some water to
the outer foil.
. Rotate the lock ring to unlock the power
switch.
. Press the power switch for more than 
seconds to activate the sonic vibration
cleaning mode.
•
appears on the LCD panel.
•
After about 0 seconds, it will be
automatically turned off, or you can turn it
off by pressing the power switch.
5. Remove the outer foil section and press the
power switch for more than  seconds to
activate the sonic vibration cleaning mode
and clean it with running water.
. Wipe off any drops of water with a dry cloth.
7. Dry the outer foil section and the shaver
completely.
8. Attach the outer foil section to the shaver.
9. Lubricate the shaver.
10
ES-LV81_AUS.indb 10
Drying the shaver with the self‑cleaning recharger
1. Attach the outer foil section to the shaver.
. Dry the shaver with self‑cleaning recharger using "Dry/
Charge" course.
. Lubricate the shaver.
Lubrication
4
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for
approximately five seconds.
5
5. Switch off the shaver, and wipe off any excess
oil from the outer foils with a soft cloth.
•
It is not necessary to oil the blades after
cleaning the shaver with the self‑cleaning
recharger. (Lubricant is included in the cleaning
detergent.)
7
2011/02/25 15:50:35