Basic Operation; Powering Up; The Display - Titan 1000XD Owner's Manual

BASIC OPERATION

POWERING UP

Press the ON touch pad.
All display indicators will illuminate momentarily.
The 4-segment pyramid-shaped Sensitivity Indicator will illuminate on the
left side of the display. The 4-segment pyramid indicates that the
detector is at full sensitivity.
When an object is detected, the object will be identified by a tone, a display
indicator, and a depth indication.
A two-minute "warm-up" is required before the detector reaches full
sensitivity.
UNDERSTANDING THE DISPLAY
The LEFT SIDE of the display has a dual purpose:
●
1 SENSITIVITY LEVEL
Upon power-up,
pressing either the up- or down-
sensitivity pads, the pyramid-
shaped display indicates the
detector's sensitivity level.
The sensitivity level can be
changed using the up- and down-
pads.
At maximum sensitivity, the unit can detect a coin-sized metal object buried
about 6" beneath the surface; larger objects can be detected much deeper.
●
2 DEPTH INDICATION
After detecting an object, the
pyramid-shaped display indicates
the approximate depth of buried,
coin-sized objects.
Objects at or near the surface
will illuminate
segment at the top of the scale.
More deeply buried objects will illuminate more segments, indicating depths
of 2, 4, or 6 inches, as identified to the left of the display.
NOTE: The depth indicator is not accurate for large, or irregularly shaped, objects.
However, the scale will provide relative depth indications for larger objects; a given
object will induce deeper readings the farther it is from the search coil.
8
and after
the single
TARGET TARGET
DEPTH ID
SILVER/
COINS
SURFACE
GOLD/
COINS/
2"
PULLTABS
SM GOLD/
4"
IRON/
TRASH
6"
MODE
TARGET TARGET
DEPTH ID
SILVER/
COINS
SURFACE
GOLD/
COINS/
2"
PULLTABS
SM GOLD/
4"
IRON/
TRASH
6"
MODE
ON
OFF
ON
OFF