Setting The Clock; Childproof Lock; Switching On The Childproof Lock; Switching Off The Childproof Lock - Bosch HBC84E653B Instruction Manual

Press the 0 button twice.
3.
20:00 appears in the display. The time symbol lights up, and
the brackets are around
Use the or button to set the cooking time.
@ A
4.
Press the n button.
5.
The oven starts. The cooking time counts down in the display
and the [ ] symbol lights up. The other time symbols go out.
r
The cooking time has elapsed
An audible signal sounds. The oven stops heating. The status
bar shows 0:00. You can cancel the signal before it has
finished by pressing the
0
the zero position. The oven is switched off.
Changing the cooking time
Use the or button to change the cooking time. The change
@ A
is applied after a few seconds.
When the Timer is counting down: Press the
change the Cooking time with the

Childproof lock

The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been switched on.

Switching on the childproof lock

Requirement: No cooking time should be set and the function
selector is in the zero position.
Press and hold the D button for approx. four seconds.
The symbol appears in the display. The childproof lock is
D
switched on.

Switching off the childproof lock

Press and hold the button for approx. four seconds.
D
The symbol on the display goes out. The childproof lock is
D
switched off.

Childproof lock with automatic programmes

When automatic programmes have been set, the childproof
lock is not operational.
10
r .
button. Turn the function selector to
button and
0
or button.
@ A
Cancelling the cooking time
Use the button to reset the cooking time to 0:00. The change
A
is applied after a few seconds. The cooking time has been
cancelled.
When the Timer is counting down: Press the
beforehand.
Checking time settings
If several time-setting options have been set, the corresponding
symbols light up on the display.
To check the Timer U , Cooking time
the button repeatedly until the brackets are around the
0
relevant symbol. The value is shown for a few seconds on the
display.

Setting the clock

When the appliance has been connected to the power supply,
or after a power cut, the [ 0
the display.
Set the clock.
Press the @ or A button.
1.
Default value : 12:00
@
Default value A : 23:59
Use the @ or A button to set the clock.
2.
Press the button.
0
3.
The time is set.
Changing the time
No other time-setting option should be set.
Press the button twice.
0
1.
The time symbols light up on the display and the brackets are
around [ 0 ].
Use the or button to change the time.
@ A
2.
The time which has been set is applied after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
button
0
r or Clock 0 , press
] symbols and four zeros light up on