Adjusting The Picture Centering; Adjusting The Picture Brightness; Adjusting The Picture Size - Sony TRINITRON VAIO CDP-220AS Service Manual

2.
Press the > +/– buttons to adjust the picture contrast.
+ for more contrast
– for less contrast
The VOLUME/CONTRAST OSD disappears 3 seconds after you release the
buttons.

Adjusting the picture brightness

The adjustment data becomes the common setting for all input signals.
1.
Press the button.
The BRIGHTNESS/GPE OSD appears.
2.
Press the . +/– buttons to adjust the picture brightness.
+ for more brightness
– for less brightness
To exit the OSD
Press the button again.
Tip
If you don't touch any buttons the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
18 GB Adjustments

Adjusting the picture size

The adjustment data becomes the individual setting for each input signal
received.
1.
Press the Å button.
The SIZE OSD appears.
2.
For vertical adjustment For horizontal adjustment
Press the . +/– buttons. Press the > +/– buttons.
+ to increase + to increase
– to decrease – to decrease
To exit the OSD
Press the Å button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
GB Adjustments
20

Adjusting the picture centering

The adjustment data becomes the individual setting for each input signal
received.
1.
Press the S button.
The CENTER OSD appears.
2.
For vertical adjustment
Press the . +/– buttons.
+ to move up
– to move down
To exit the OSD
Press the S button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
Adjusting the picture rotation
The adjustment data becomes the common setting for all input signals.
1.
Press the d button.
The GEOMETRY OSD appears.
2.
Press the . +/– buttons.
+ to rotate clockwise
– to rotate counterclockwise
To exit the OSD
Press the d button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected item
appears.
– 8 –
For horizontal adjustment
Press the > +/– buttons.
+ to move right
– to move left
GB
Adjustments 19
GB
Adjustments 21