Connecting To An Apple Macintosh Pc - LG StudioWorks 910SC User Manual

Connecting to an Apple Macintosh PC

Figure 2 shows the connection to an Apple Macintosh, using a
separately purchased adapter.
1.
Power OFF both the monitor and the PC.
2.
Locate the appropriate MAC to VGA adapter block at your local
computer store. This adapter changes the high density 3 row 15
pin VGA connector to the correct 15 pin 2 row connection to mate
with your MAC. Attach the other end of the signal cable to the
side of the adapter block with 3 rows.
3.
Connect the attached adapter block/signal cable to the video
output on your MAC.
4.
Power ON the PC, then the monitor.
5.
If you see the SELF DIAGNOSTICS message, check the signal
cable and connectors.
6.
After using the system, power OFF the monitor, then the PC.
Power Cord
Adapter 15P
Signal Cable
Figure 2.
A6
D-15P