Troubleshooting - Targus desktop USB 2.0 7-port hub User Manual

With audio pass-through
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Targus Desktop USB 2.0 7-Port Hub with Audio Pass-Through
respond slowly while a graphic print job is printing or
while you are experiencing heavy network traffic.
We recommend the following guidelines:
• Do not transfer data to or from multiple high-speed
devices, such as a digital camera or scanner, at the
same time.
• If speed degradation does occur, close other programs
that use a USB device to improve device performance.
Please note that the two Targus Always On USB ports
cannot charge iPod when the laptop is powered down or
disconnected from the USB 2.0 7-port hub.

Troubleshooting

Device Not Working
• Make sure that the device is fully inserted into the
correct port on the hub.
• Plug the device into a different port. If it still doesn't
work, test the device by connecting it directly to your
computer.
• Verify that you ran the Setup or Install program for the
device.
• Make sure that the device appears in Device Manager.
For more information refer to "Verifying Devices are
Installed" .
• Disconnect all devices from the hub and reconnect
them, one at a time. Check that each device works
before plugging in the next one.
• Each USB port is equipped with over-current
protection. Should a USB device draw more current
than the USB port can supply, the port will shut down.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Desktop usb 2.0 7-port hub with audio pass-through

Table of Contents