Table of Contents
Advertisement
External Control Device Setup
09. Color (Command:i)
G To adjust the screen color.
You can also adjust color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Transmit as Hexadecimal code.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][X]
Data Min : 0 ~ Max : 64
10. Tint (Command:j)
G To adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
* Transmit as Hexadecimal code.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][X]
Data Red : 0 ~ Green : 64
11. Sharpness (Command:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Transmit as Hexadecimal code.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][X]
Data Min : 0 ~ Max : 64
56
12. OSD select (Command:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
1 : OSD on
Acknowledgement
[l][ ][Set ID][ ][OK][Data][X]
Data 0 : OSD off
1 : OSD on
13. Remote control lock mode
(Command:m)
G To set up the locking function of set remote control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Acknowledgement
[m][ ][Set ID][ ][OK][Data][X]
Data 0 : off
1 : on
* This function is setting mode when the remote control
is not used.
14. PIP select (Command:n)
G To control PIP (Picture-in-Picture) or twin picture. You
can also control PIP/TWIN PICTURE using the pip/twin
picture button on remote control or in the Twin/Pip
menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0 : PIP/ DW off
1 : PIP
2 : Twin picture (DW1)
3 : Twin picture (DW2)
Acknowledgement
[n][ ][Set ID][ ][OK][Data][X]
Data 0 : PIP/ DW off
1 : PIP
2 : Twin picture (DW1)
3 : Twin picture (DW2)
Advertisement
Table of Contents
