D-Link N300 User Manual page 52

Section 5 - Troubleshooting
• Conigure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link repeater in the address bar.
This should open the login page for your web management.
• If you still cannot access the coniguration, unplug the power to the repeater for 10 seconds and plug back in. Wait about
30 seconds and try accessing the coniguration. If you have multiple computers, try connecting using a diferent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your repeater. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the repeater, locate the reset button (hole) on the rear panel of the unit. With the repeater powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the repeater will go through its reboot process. Wait about
30 seconds to access the repeater. The default IP address is http://dlinkap.local. When logging in, the username is admin and
leave the password box empty.
D-Link DAP-1320 User Manual 49